Publicité
Les langues disponibles
Les langues disponibles
select a desired auto-ON time from 1 to 24 hours.
The dehumidifying mode can be selected at the same time.
-
The appliance will automatically turn on with the set functions once the select time passed.
-
To cancel the timer, press the adjustment button "+" and "-" at the same time, then set the timer to 0 hour; the
timer will falsh several times, then the timer indicator light will turn off.
DRAIN THE COLLECTED WATER
When the water tank is full, the water tank full indicator light will illuminate. The operation will stop
automatically and the buzzer will beep 20 times to alert the user that the water needs to be emptied from the
water tank.
Empty the water tank
1. Pull out the water tank from the appliance.
2. Discard the collected water.
3. Install the water tank back.
NOTE:
1. When placing the water tank back, press the tank firmly into the place with both hands.
2. Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water
level correctly without the float and water may leak from the water tank.
Continuous water drainage
The appliance has a continuous drainage plughole. Unplug the hole and connect the provided plastic pipe; the
condensed water can be continuously drained out. Install drain piping at a downhill grade to make sure that
condensed water can be drained continuously. Now the condensed water will be drained out by this drainage
plughole instead collected into the water tank.
- 8 -
Publicité
