Publicité
Les langues disponibles
Les langues disponibles
Dehumidifying capacity
In the same room temperature, the dehumidifying capacity is higher in higher relative humidity and the
dehumidifying capacity is lower in lower relative humidity. In the same relative humidity, the dehumidifying
capacity is higher in higher temperature and the dehumidifying capacity is lower in lower temperature.
BEFORE FIRST USE
Wheels installation
1. Take the appliance out of the box.
•
After removing the packaging, make sure that the appliance is in good condition.
•
Do not allow children to play with the packaging materials as there is risk of suffocation.
2. Open the water tank to take the wheels out. Do not plug in the appliance.
3. Tilt the appliance and insert the wheels into the four holes on its bottom.
4. After the wheels are installed, put the appliance upright and stand still for more than 2 hours before turning
it on for use.
The appliance shall be installed on a flat surface where the air inlet/outlet would not be blocked. The required
distance around the unit should be at least 30cm. To save energy, keep windows and door closed when the
appliance is running.
Note: If the dehumidifier gets interference from the household appliances, such as television and radio cassette
player, please keep the equipment away from the dehumidifier for over 70cm.
USE
Plug in the appliance. A "beep" sound will be heard. The appliance is on standby mode.
ON/off: Press the on/off button to turn on the appliance. The panel will show the current humidity. Press the
button again, the appliance will be off.
Dehumidifying mode: press the dehumidifying mode button to choose manual mode or clothes drying mode.
1. Manual mode: press the adjustment button "+"/"-" to set your desired humidity level from 30%-80%. The
set humidity will flash several times in the panel, then environmental humidity will show.
When you adjust the humidity level, you may find "CO" show in the display. If you set humidity level to "CO",
the appliance will dehumidify continously.
2. Clothes drying mode: Place the appliance in a room with closed doors along with the clothes rack. Under
this mode, the humidity cannot be changed. The environmental humidity is shown on the panel.
Note: Do not cover the unit with washed clothes.
TIMER:
Auto-OFF setting
When the appliance is ON, press the adjustment button "+" and "-" at the same time, "00" will show on
-
the display and the timer indictor light will be on. Now you can press the adjustment button "+" or "-" to
select a desired auto-OFF time from 1 to 24 hours.
The timer will flash for several seconds, then the panel will show the environmental humidity. The timer
-
setting is confirmed.
The appliance will automatically turn off once the select time has passed.
-
Auto-ON setting
When the appliance is OFF, press the adjustment button "+" and "-" at the same time, "00" will show on
-
the display and the timer indictor light will be on. Now you can press the adjustment button "+" or "-" to
- 7 -
Publicité
