Philips HI 905 Mode D'emploi page 7

- Press button (J) and
steam activator (E)
(fig. 10).
"Jet-of-steam"
• Applying "Jet-of-steam"
can help remove
stubborn wrinkles.
- Press button (I) and
steam activator (E)
(fig. 11).
• It is not necessary to
set the temperature
dial (G) to the steam
range for "Jet-of-
steam".
Steaming in a vertical position
Hanging curtains and
clothing (jackets,
woman's suits, coats) can
be steamed by holding
the iron in a vertical
position (fig. 12).
"Jet-of-steam" and "Shot-
of-steam" can be applied
as well in a vertical
position.
Dry-ironing
For ironing without steam, set the steam
control (H) to position O. Steam activator (E) is
now blocked and no steam can come to the iron.
Also "Shot-of-steam" and "Jet-of-steam" do not
function.
When finished ironing
- Switch off the steam
tank and the iron
(fig. 13).
- Remove the mains
plug from the wall
socket.
- Place the iron on the
stand and let it cool
down.
• It is not necessary to pour the remainder of the
water out of the steam tank.
10
11
12
13
Cleaning
- Before cleaning remove the mains plug from
the wall socket and allow the iron to cool down
sufficiently.
- The appliance can be cleaned with a damp
cloth.
Storage
- For transport there are
handgrips on either
side of the steam tank
(fig. 14).
- Regularly check if the
mains cord and the
supply hose are still in
a good and safe
condition.
7
14