Publicité
Les langues disponibles
Les langues disponibles
Tare Operation (Cont.)
2. While the scale is off, place the empty container on the scale platform.
Turn the scale on. The display will show zero. The weight of the
container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone
will display.
4. The weight of additional ingredients may be tared out as well. For
example, if a recipe calls for ½ lb rice and ½ lb beans, place the rice
into the bowl. Once the correct amount of rice is weighed, press "on
zero" until the display is reset to zero. Add the ½ lbs of beans. Both
ingredients have been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative
number when the items are removed from the scale. To reset the
scale back to zero for a new measurement, press "on zero" until the
display resets to zero.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains,
use a mild soap. Never use detergents, excess water, treated cloths,
harsh cleaning agents, or sprays. Avoid contact with acids, such as
citrus juices.
2. Do not tamper with the scale's internal components. Doing so will
invalidate the warranty on this unit and may cause damage. The scale
contains no user-serviceable parts
3. Although your scale is designed to be maintenance-free, it contains
sensitive electronic parts. Avoid rough treatment. Treat it with care to
ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended
for commercial or medical use.
5. This scale is designed to read weights up to 11 lbs/5 kgs/175fl.oz/5000
ml. To prevent damage, do not place more than 11 lbs/ 5 kgs/ 175fl.oz/
5000 ml on it.
6. Do not store scale where you store cleaning chemicals. The vapors
from some household products may affect the electronic components
of your scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent
run down of the battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Do not
mix old and new batteries. Do not mix Alkaline, carbon-zinc (standard)
or Nickel-Cadmium (rechargeable) batteries. Remove the batteries if
the scale will not be used for a long period of time.
9. Unstable Warning: Should "UnSt" appear on the display, this indicates
the scale is unstable. Place the scale on a hard, level surface during
use.
10. Overload Warning: Should "Err" appear on the display during a
weighing, this indicates that the maximum weighing capacity of
the scale has been exceeded. Remove the weight immediately;
otherwise, permanent damage could occur.
3
Publicité
