Télécharger Imprimer la page

Taylor 1020NFS Manuel D'instructions page 2

Publicité

Les langues disponibles

Les langues disponibles

Battery Installation
1
. This scale operates on 2 "AAA" batteries (included). Remove
any plastic wrap from the batteries before proceeding. Always
replace all batteries at the same time; do not combine old and
new batteries. Do not mix Alkaline, carbon-zinc (standard) or
Nickel-Cadmium (rechargeable) batteries.
2. Open the battery compartment cover on the bottom of the
scale.
3. Place the batteries into the battery compartment with the correct
polarity orientation.
4. Replace the battery cover.
5. Replace the batteries when the Low Battery icon "
on the upper left side of the display, or the readings grow dim or
irregular.
General Weighing Operation
1. Place the scale on a hard, level surface.
2. Press "on zero" to turn the scale on. The display will turn on,
then shows zero when it is ready for use. If the display does not
show zero, press "on zero" to reset (tare) the scale to zero.
3. Your scale is set at the factory to weigh in pounds/ounces. To
switch between kilograms/grams, pounds/ounces, milliliters
and fluid ounces, press "kg lb" (for kilograms/grams or pounds/
ounces) or "ml fl.oz" (for milliliters or fluid ounces).The liquid
measure feature is suitable for all water based liquids, including
wine, milk, stock, cream etc.
Note: Oils have a lower specific gravity, which will result in a
volume reading of approx +10%. If measuring oils by volume
on this scale, please adjust for this accordingly.
4. Place the item to be weighed on the center of the platform.
The weight will display. As you add weight, the weight
displayed increases.
5. The scale will turn off automatically after approximately 1
minute of non-use or if there is no change in weight after
approximately 3 minutes. Press and hold "on zero" to turn the
scale off manually.
Tare Operation
You may wish to weigh ingredients in a bowl or other container
(not included). In this case, you will need to tare, or offset, the
weight of the bowl so that only the weight of the ingredients is
displayed.
1. Choose a container that will safely balance on the platform
without tipping or falling. Do not use a heavy container, as this
might reduce the maximum capacity of the scale.
2
" appears

Publicité

loading