Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Trouble shooting
Symptom
No incoming call yet
the Amplicall20 rings
automatically or rings
continuously.
The shaker vibrates
automatically or
continuously.
The strobe LED
flashes automatically
or continuously.
The red low battery
LED flashes
automatically.
When there is an
incoming call but no
ringing can be heard.
Solution
1) Check the batteries are
inserted correctly.
2) Check the power adaptor is
connected correctly.
3) Turn off the power for 10
minutes and then turn it
back on.
1) Replace the batteries.
2) Turn off the power for 10
minutes and then turn it
back on.
1) Check it is connected to the
power adaptor correctly.
2) Check the batteries are
inserted correctly.
3) Check the volume switch is
on.
4) Check it is connected to the
line cord correctly.
5) Check the alarm mode
selection switch position is
correct
10
Publicité
