Publicité
Les langues disponibles
Les langues disponibles
NOTE: Improper use of batteries can result in a chemical leakage or explosion.
●
Use only the size and type of battery specified.
●
Danger of explosion if batteries are incorrectly replaced.
●
If the device is not to be used for a long period of time, remove the battery to
prevent damage or injury from possible battery leakage.
●
The batteries should not be exposed to excessive heat due to sunlight, fire or
other heat sources.
WebOS Voice Remote Control
1.
Press the top of the battery cover
and push back to open.
2. Install the two 1.5V AA batteries in
the battery compartment properly.
GETTING STARTED WITH WEBOS TV
Initial Setup
Press the
button on the control panel or on the remote control to turn on the TV,
follow the on-screen instructions to finish the initial setup.
Watching TV Broadcasting
Your TV must be connected to an antenna/cable or a set-top box that can receive
broadcasting for broadcasting.
Prepare Live TV
Follow the steps below to finish an antenna/cable connection if your TV is not
connected to a broadcast antenna.
1.
Connect the broadcast antenna/cable to the TV. You may also connect a piece
of equipment that can receive broadcasting such as a set-top box instead of the
antenna/cable.
/
2. Launch
Control Settings.
3. Start the
/
only channels being broadcast.
CCD-0007280 Rev: 07-03-23
/ Connection / Device Connection Settings / Universal
/ Channels Channel / Tuning / Auto Tuning. Finds and adds
- 19 -
Publicité
