Publicité
Les langues disponibles
Les langues disponibles
Connect Power
Connect the power cord to a GFCI protected AC outlet with an "in-use" waterproof
cover.
CAUTION: Do not connect power cord during cable connecting and TV installation.
50˝ TV Shown
WARNING: TV and GFCI receptacle must be installed a safe distance away from
any water source. Be sure to check local electrical codes and comply with their local
standards.
Install Remote Control Battery
1.
Your remote control is powered by two (2) AAA batteries.
2. Turn the remote over and remove battery cover.
3. Place two (2) "AAA" batteries into the battery compartment with the "+" and "-"
ends facing as indicated.
4. Replace the cover.
NOTE: Protect the remote with the provided silicone sleeve from damage or malfunction due to accidental
spillage of liquids. Do not immerse the remote control in water, or expose it to rain to prevent damage or
malfunction.
- 18 -
PROTECTED
GFCI
OUTLET
CCD-0007280 Rev: 07-03-23
Publicité
