Tripp-Lite LS1006M Manuel De L'utilisateur page 3

200611036 93-2024 LS1006M OM.qxd
Quick Installation
1 Connect your line
conditioner to an electrical
outlet.
Plug your computer and
2
electronics into your line
conditioner's outlets.
3 Turn your line conditioner's
power switch on.
Quick Installation
This connection is optional. Your line conditioner will work properly without this connection.
4 Modem/Fax Protection
(Select Models Only)
Using telephone cords, connect your wall jack
to the line conditioner jack marked "IN" and
your equipment to the UPS jack marked
"OUT". This will protect your equipment
from surges over the phone line, but you
should make sure that your equipment is also
protected against surges on the AC line.
11/20/2006 11:33 AM
1
2
3
optional
4
3
Page 3