Hart HPGG01 Manuel D'utilisation page 6

FEATURES
PRODUCT SPECIFICATIONS
Grease Type ..................................................Up to NLGI #2
Hose Length ............................................................... 30 in.
Bulk Fill Port ......................................................1/8 in. NPT
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
OPERATION
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you
are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
Use safety equipment. Protect your eyes, skin, and
lungs while handling, loading, dispensing, and removing
grease. Failure to do so may result in serious personal
injury.
Cartridge Size ...............................................13.7 - 14.5 oz.
Grease Capacity ...............16 oz. bulk or 14.5 oz. cartridge
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
 Lubricate grease fittings and other components on
vehicles, factory equipment, and other machinery.
INSTALLING/REMOVING HOSE CLIPS
See Figure 1, page 11.
The hose clips may be installed on either side of the housing.
 Align the holes in the hose clips with the holes in the
housing.
 Install the screws to secure the hose clips in place.
 To uninstall, remove the screws, then remove the hose
clips.
INSTALLING / REMOVING BATTERY PACK
See Figure 2, page 11.
 Slide lock-off button to the locked position.
 Insert the battery pack into the battery port as shown.
 Make sure the latch on the battery pack snaps into place
and the battery pack is secured in the product before
beginning operation.
 Depress the latch and pull to release and remove the
battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
6 – English