Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
REVERSE DOOR
Follow the following stages to reverse the door from its initial position.
DEPOSIT DOORS
Remove the two screws. (6) securing the top. Remove the top (7).
1.
Remove the 2 screws holding the top hinge (5) on the body. Remove the top hinge (5).
2.
Lift and remove the refrigerator door. Store it on an area without the risk of damage.
3.
Remove the 2 screws (8) holding the bottom hinge (2). Remove the bottom hinge (2).
4.
Unscrew the left foot (4) and screw it on the right side.
5.
Then position the lower hinge (2) on the opposite side and attach it with 2 screws (8).
6.
Reset the rod (8) on the bottom hinge (2).
7.
Position the refrigerator door on the bottom hinge.
8.
Then position the top hinge (5) in the freezer door,place the whole assembly on the
9.
opposite side. Position the refrigerator door in the condition 'closed' and fix the top
hinge (5) with 2 screws (1).
Attention, before tightening the screws (1 and 8), check that the door is properly
10.
aligned on the body.
Install the top, screw it the screws (6).
11.
GB-10
HOW TO CHANGE THE OPENING DIRECTION OF 4* FREEZER'S WICKET
DOOR?WICKET DOOR?
Remove the threaded rod at the right bottom.
1.
Remove the wicket door.
2.
Remove the cover hole at the left bottom.
3.
Unscrew the 2 screws from the lock to the left.
4.
Remove the lock and put it at the right position, then tighten it.
5.
Put the wicket door in a new position, then put the threaded rod on the left.
6.
Put the cover hole on the right side.
7.
MAINTENANCE
FRIDGE DEFROSTING
The fridge defrosting process is carried out automatically every time the compressor
stops.
The defrost water is automatically routed to the drain port and into a tray placed on
the top of the compressor to the rear of the appliance from which it evaporates.
Make sure the drain port on the fridge at the rear of the appliance is kept clear.
ENGLISH
GB-11
Publicité
