Publicité
display installation
Check depth of screw threads in display before inserting screws. Inserting a screw that
is longer than the hole could result in damage to display. Depth can be confirmed by
inserting hex wrench into hole and marking its length then confirming this length is
sufficient by comparing it to the screw you are using.
Attach Brackets to Display
1.
A. Install display bracket using (4) "A" Bolts
B. Loosely install (1) "B" screw to the center of each display bracket.
This will act as an alignment screw for the next step.
A x 4
B x 2
Touch Presenter Motorized Mobile Stand
A
B
A
Publicité
