SW-Motech HDG.00.220.21101/B Instructions De Montage page 15

1
 WARNING: Always wear eye and hand protection!
 WARNING: Always use the proper tools!
 NOTE: Installation is shown on the left side. Repeat the installation with the
corresponding parts on the right side of the handlebar.
Screw the sports hand-guard shells (1/2) onto the brackets (*).
Carefully tighten the screws (4) hand-tight (max. 1 Nm).
 WARNING: Tightening too tightly can damage the plastic parts!
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
4
1
1
×
1
2
×
4
3
×
8
4
×
Errors and omissions excepted
Subject to technical and design changes.