Publicité
Les langues disponibles
Les langues disponibles
1x long red
lighting
6x long red
flashing
1x orange
and 1 x green
lighting (after
plugging into a
socket)
9
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the pluggable switch
and meter, please proceed as follows:
•
Unplug the device from the socket (see figure 2).
•
Plug in the device into the socket again while
Duty cycle
exceeded or
transmission
failed
Device defec-
tive
Test display
Restore factory settings
Please try again
(see „8.1 Com-
mand not con-
firmed" on page
36 or „8.2 Duty
cycle" on page
37).
Please see your
app for error mes-
sage or contact
your retailer.
Once the test dis-
play has stopped,
you can continue.
39
Publicité
