Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
To be able to use the device again, you must remove the
overload and unplug the device once from the socket then
plug it back in again. Alternatively, you can wait 30 minutes
after removing the overload ("restart lock"). The device can
then be switched on again. The device is not automatically
switched on after the restart lock has expired.
8.4
Error codes and flashing sequences
Flashing code
Short orange
flashing
1x long green
lighting
1x long red
lighting
Slow orange
flashing (every
10 seconds)
38
Meaning
Radio trans-
mission/at-
tempting to
transmit
Transmission
confirmed
Transmission
failed
Teach-in
mode active
Solution
Please wait, until
transmission has
been confirmed.
You can continue
operation.
Please try again
(s. „8.1 Command
not confirmed" on
page 36).
Please enter the
last four numbers
of the device
number to confirm
(see „5.1 Installa-
tion and teaching-
in" on page 33).
Publicité
