Publicité
Les langues disponibles
Les langues disponibles
Start-up
To integrate the pluggable switch and meter into your
system and enable it to communicate with other Home-
matic IP devices, you must teach-in the device to your
Homematic IP Access Point first.
To teach-in the pluggable switch and meter, please pro-
ceed as follows:
•
Open the Homematic IP app on your smart-
phone.
Select the menu item "Teach-in device".
•
•
Plug in the pluggable switch and meter into the
desired socket (see figure 2).
•
Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
shortly (see figure 3).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
•
Please wait until teach-in is completed.
•
If teaching-in was successful, the LED lights up
green. The device is now ready for use.
•
If the LED lights up red, please try again.
34
Publicité
