Télécharger Imprimer la page

oraimo OSH-511A Manuel D'utilisation page 4

Publicité

Les langues disponibles

Les langues disponibles

· To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings
may become blocked.
· DO NOT touch or hold the mains plug with wet hands.
· DO NOT insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause electric shock, fire or damage to
the heater.
· To avoid excessive room temperatures which can cause
hyperthermia: DO NOT leave the heater running unattended in a
confined space around infants, or individuals with reduced physical,
sensory, or mental capabilities.
· Always place and use the heater on a horizontal and stable
surface.
· Always unplug the heater before cleaning, making any repairs or
servicing, or whenever not in use. To disconnect the heater, turn it
off, then remove the plug from the outlet.
· It is normal that there is a trace of smoke or odor when using it for
the first time. It will quickly evaporate and should not re-occur.
· Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 3 feet (0.9 m) from the front of
the heater and keep them away from the sides and rear.
· DO NOT use outdoors.
· Hyperthermia can result in death. Symptoms of hyperthermia
include high body temperature, headache, nausea, vomiting,
tiredness, dizziness, fainting, and rapid pulse.
· If you begin to experience symptoms related to hyperthermia, tum
off the heater and seek medical attention.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
3
KNOWING YOUR HEATER
Make sure that the heater is placed upright on a firm, level surface free
from obstructions, and at least 3ft. (0.9m) away from any wall or
combustible material.
Control Panel
LED Display
Night Light
Air Outlet
Base
FRONT
SPECIFICATIONS
Model
OSH-511A
Voltage
120V~ 60Hz
Power
1500W(High), 900W(Low)
Remote Control Battery
CR2032, 3V
Remote Control
(with CR2032 Battery)
Handle
Air Inlet
Power Cord & Plug
REAR
4

Publicité

loading