CASO DESIGN B 1000 Manuel D'instructions page 27


The electrical outlet must be protected by a 16A safety cut-out switch.

The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or
gangs is prohibited because of the danger of fire that is involved with this.

Make sure that the power cable is undamaged and has not been installed under the
ice maker or over hot or sharp surfaces.

The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a missing
or damaged protective conductor.
Caso Standmixer B 1000
13 Design and Function
In this chapter, you'll find important information on
the design and function of the device.
13.1 Overview and assembling
1. Top lid
2. Spatula
3. Blender lid
4. Blender jug
5. Blades
6. Blade base
7. Main machine
► Use the spatula only when the device is not
working.
27