Atlantic 851129 Notice D'utilisation Et D'installation page 33

USING INTERNAL PROGRAMMING
Anticipation of heating
Your device is equipped with a function that allows your device to anticipate the heating
when you use programming.
When you set the programming of your device, it will anticipate the heating according to the
time of rise in temperature so that your room is at the right temperature when you arrive.
For example: if you set your programming with a comfortable return at 15:00, the unit will
start before you can anticipate the heating of your room (between 10 minutes and one
hour).
M
odifying the ProgrAMs
You may program up to 3 Comfort temperature ranges for each day of the week. Outside
the Comfort ranges, lowering the temperature is set in "Lower ECO T°" Prog mode.
Select the day with . Validate
Select . Validate .
Select the start time with
or . Validate .
c
oPying A ProgrAM
You may copy a day's program to one or more days.
Select . Validate .
Scroll through the days with
To validate the copy, select "Copy". Validate
Monday
Example: Program copy from Monday to Tuesday,
Thu Fri
Thursday, Friday.
Wen Sat
Thi Sun
To copy
USING EXTERNAL PROGRAMMING
The device follows the external control of your installation via pilot wire link. To do this,
programming must be inactive.
.
or . Validate . Select the end time with
or . Validate the day to copy the program with
.
29
EN
.