English
Before you start
Thank you for choosing our product. Please note the following information to ensure that you make maximum use of your
DURAVIT bathroom furniture. Please take the time to read through this information before you start to assemble and use
your DURAVIT bathroom furniture. This is the only way to prevent accidents and damage to the product.
About the product
DURAVIT bathroom furniture fulfils current standards and guidelines and is designed for use in bathrooms. Direct wetting
with water, for example, when showering, should be avoided.
Mains connection
NOTE
Furniture with lighting must be connected to the mains supply by a professional electrician, taking into account the applicable
national regulations. The mains supply socket must be of at least the same protection class as the light. We reserve the right
to make modifications to the models to reflect the current development status.
IMPORTANT!
The green-yellow insulated wire conductor must be connected to the earthed conductor (terminal labelled
Lighting of protection class
I
II
III
L = brown
= yellow/green
For your safety
Contact with live parts can cause injury or death.
– Assembly work must be carried out in accordance with these mounting instructions and in observance of all national,
European and international guidelines and standards.
– The electrical system must be connected via a GFI safety cutout (only applicable for wet rooms e.g. bathrooms or other
special-use rooms).
– Before carrying out any work to electrical components, the relevant safety cutout must first be deactivated. Always make sure
that the power supply really has been disconnected. Ensure that the power supply cannot be switched on again inadvertently.
Duravit reserves the right to make technical modifications to the range.
Lead/connection diagram
H03VV H2-F/H03VV-F, min. 1.5 sq. mm
L
N
H03VV-F, min. 0.75 sq. mm
L
N
AC 12 V
N = blue
or
)!
Europe
EN 60598-1,2
Germany
VDE 100, Teil 701
Austria
ÖVE-EN 1, Teil 4,
§ 49
Switzerland
NIN 100
France
NF.C. 15-100,
section 7-701
Luxembourg
EVU/VDE 100,
Teil 701
Great Britain
BS 7671
Netherlands
NEN 1010, 727.1+2
Belgium
R.G.I.E., Art. 86.10
Italy
CEI 64-8/7 sez. 701
AC 230 V / 50 HZ
Electrical terminal field
5
MAL_52288/07.13.8