Philips FC8740 Mode D'emploi page 16

English
16
4222.003.3306.7.indd 16
1 Take the motor protection filter out of the appliance.
 Tap the dust out of the filter over a dustbin.
If the motor protection filter is very dirty, you can also rinse it with cold tap
water.
Do not use washing-up liquid or any other cleaning agent to clean the
motor protection filter!
Let the filter cylinder dry completely before you reinsert it into the
appliance.
 Press the clean motor protection filter firmly back into the filter
compartment to ensure that it is properly placed.
Super Clean Air filter (specific types only)
The Super Clean Air filter located in the back of the appliance has
electrostatically charged fibres. These fibres filter a large part of the smaller
particles from the exhaust air.
Replace the Super Clean Air filter every six months.
1 Open the filter grille.
 Remove the filter holder.
 Open the filter holder and remove the old filter.
19-12-2008 13:06:08