BEA 380/10-EKT Notice D'emploi page 6

1 Technical data
Actuation modes:
Height/ length (mm):
Min/max operating pressure
(bar):
Noise characteristics (according to EN12549:1999):
Vibration value (according to ISO 8662-11:1999):
Fasteners
Length (mm):
Wire diameter (mm):
Crown width (mm):
Scope of delivery
2 Safety advices
Risk of most severe injuries from nailers!
Any person operating the nailer must have read and understood both the following device-specific information as
well as the General operation instructions for pneumatic nailers! Always have both documents ready!
Operating the device without knowing the General operating instructions is forbidden!
Resulting problems extinct any possible claims against the manufacturer.
3 Safe resting position
All manuals and user guides at all-guides.com
Single
sequential Depth adjustment:
actuation
144 / 286 Weight (without fasteners)(kg):
4 - 6 Air consumption per driving operation:
Pneumatic nailer, General operating instructions, device-specific information
•
•
•
F
L
T
EN - 6
Device-specific additional instructions for nailer
L L
pA, 1s WA. 1s
77,9 dB(A) 82,5 dB(A)
a
hd
1,03 m/s²
Whenever not in use, safely put down the device
on its left or right side according to adjacent symbol
picture (see Chap. 1.3 of General operating instructions).
Do not put down the device on another side.
Also when putting down or lifting up, never point the driving
nose at persons or animals.
front
left
top
380/10-EKT
380/10-400EKT
No
1,92
0,45 l at 6 bar
K pA and K WA
2,5 dB(A)
K
a
0,25 m/s²
Staple 380
6 - 10
0,7 x 0,9
12,9
B back
R right
U underside