Publicité
Les langues disponibles
Les langues disponibles
Indication to clean the aluminium filters
If the
indication appears on the display, you need to clean the alu-
minium filters.
Once the filters are cleaned you can clear the
indication. To do this,
touch and hold
for approximately 3 seconds. The
symbol will be
shown on the display and the appliance will operate normally.
Note: To clear the
indication, the appliance must not operate.
If you want to continue to use the appliance while the
indication is
not cleared, touch
and fan speed will be displayed temporarily and
then
will be displayed again. The fan will continue to operate.
Note: The
indication will be displayed after approximately 60 hours
of fan operation.
- 11 -
Publicité
