Operating Instructions
Gas burner
Item no. 1553060
Flambé burner 1300 °C
Item no. 1553061
Creme brulee set
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product produces an adjustable jet-flame with a max. temperature of 1300 °C. It has an
inbuilt piezo-ignition mechanism. The quantity of gas (flame size) and air volume (flame type)
are adjustable.
The product may only be filled and operated with lighter gas (isobutane gas).
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause a fire, explosions or other hazards. Read the instructions carefully and
store them in a safe place. Make this product available to third parties only together with its
operating instructions.
This product complies with statutory national and European regulations. All company and prod-
uct names are trademarks of their respective owners. All rights reserved.
3 Delivery content
Gas burner
Base
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The arrow symbol indicates special information and advice on operation.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The product is not a toy and it should be kept out of the reach of children. Keep the prod-
uct out of the reach of children. This applies to both during and after operation. Keep the
product in a place inaccessible to children! The same applies to the gas container, which
is used for refilling.
The housing must not be opened or disassembled. It must not be held in or thrown into a
fire or open flames! There is a risk of explosion!
Do not subject the product to heavy mechanical stress. The gas tank may otherwise be-
come unsealed. This can result in a fire or explosion!
If the product should become damaged or defective, dispose of it correctly. You may need
to keep the product at a suitable outdoor location for a prolonged period to allow any re-
sidual gas still contained in the product to escape. Ensure that there is sufficient ventilation.
Keep a distance to any open fires or ignition sources. This can result in a fire or explosion!
Keep a safe distance from flammable objects. This constitutes a fire hazard!
The product must not be operated, filled or stored in areas where explosive, easily flamma-
ble materials, combustible gases, vapours, dust, or inflammable liquids (solvents, alcohol,
petrol, etc.) are stored or could be stored. There is the risk of explosion or fire!
Protect the product from dirt and damp. This will lead to damage to the product or corrosion.
Only move the product when it has completely cooled down. There is a danger of burns and
fire! The same applies to storing the product.
The product may be transported or stored only in an upright position (feet down, regulator
up).
For use in commercial institutions, the accident prevention regulations of the employer's
liability insurance company are to be observed.
In schools, educational facilities, hobby and DIY workshops, the product must be operated
under the supervision of qualified personnel.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
1336DN011
(alternatively scan the QR code) to download the
4x small ramekin (only item no. 1553061)
Operating instructions
If it is no longer possible to operate the product safely, stop using it and prevent unauthor-
1336-23
ized use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
Consult a technician if you are not sure how to use or connect the product.
Maintenance, modifications and repairs must be done by a technician or an authorized
repair centre.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
5.2 Filling
Only fill the product after it has cooled down completely. Otherwise there is a danger of
explosion!
If the hot-gas burner is damaged, it must not be refilled! This can result in a fire or explo-
sion!
Fill your product only with commercially available lighter gas and only in a well-ventilated
environment. Avoid open flames when filling the product. There is a risk of explosion!
When filling, observe the safety and operating instructions of the gas cartridge manufac-
turer.
Stop the filling process immediately if gas escapes. A gas-air mixture could arise which
could explode. Make sure that the room has been well ventilated before you ignite the
product or other sources of ignition.
Once filled, the product contains highly flammable gas under pressure. It must therefore
be kept away from heat sources, heat (> +40 °C) or direct sunlight. Otherwise there is a
danger of explosion!
Never remove or open the filling valve to allow gas to escape. This can result in a fire or
explosion!
5.3 Operation
Only hold the product by the grip. Always hold it so the flame nozzle points away from you.
Always hold it so that the grip points downward.
Keep the product away from your body and clothing while igniting and during operation.
Never reach into the open flame! Never touch the hot metal parts of the hot-gas burner!
This will cause serious burns!
Never leave the product unattended during use. This constitutes a fire hazard!
Note that depending on the ambient lighting, the flame may be only poorly visible or not
visible at all.
During breaks or to let it cool, place the product in the provided base. Place the product
on a stable, level surface. Make sure that it cannot tip over or fall off the surface. This
constitutes a fire hazard!
Always ignite the flame for no more than 15-20 minutes at any one time; otherwise, the
housing of the hot-gas burner could heat up excessively. There is a danger of burning!
Never ignite liquid or gaseous fuels (e.g. benzines, spirits, etc.) with the product. There is
a risk of explosion!
Depending on the activity for which you use the product, suitable protective equipment and
observation of additional safety precautions are necessary.
Many materials give off biohazardous or even toxic vapours when heated. If necessary, use
a suitable venting system or ventilate sufficiently.
Never try to cool down the product using water or other liquids. This will cause damage to
the product.
6 Operating elements
1
2
8
3
4
5
1. Flame nozzle
2. Air volume regulator
3. Gas volume regulator (not depicted)
4. Locking lever
5. Push button
6
6. Grip with integrated gas tank
7. Filling valve (not depicted)
8. Base
7