Publicité
Les langues disponibles
Les langues disponibles
Method 2
If the installation surface
in cabinet don't adapt to
install the cooker hood,
then as per fig, fix the
position of cooker hood
on the wall. On the wall,
install 2 screws (supplied)
according to the relative
position of 2 key holes on
the back of hood. The
extent of screwing should
be convenience to the
next
installation.
install screws in the secu-
rity holes, in case of front
and
back
hood, so that the using is
safer.
Installation of hoods built in combi cabinets is the same as
previous method.
Information
The cooker hood must not be installed and connected to flues
where other appliances are installed and which run off other
energy supplied different to electricity (water heater boiled
cookers, range/gas, etc.).
Also
moving
of
145
50
400
7
Security hole
V.1
Publicité
