Johnson SIROCO Serie Guide D'utilisation page 23

MAINTENANCE
GREASE FILTERS
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
 The filters must be cleaned every 2 months of opera-
tion, or more frequently for particularly heavy usage,
and can be washed in a dishwasher.
 Remove the filters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
 Any kind of bending of the filters has to be avoided
when washing them. Before fitting them again into
the hood make sure that they are completely dry.
(The color of the filter surface may change
throughout the time but this has no influence to the
filter efficiency).
 When fitting the filters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION)
These filters are not washable and cannot be regenerated, and must be replaced
approximately every 4 months of operation, or more frequently with heavy usage.
REPLACING THE ACTIVATED CHARCOAL FILTER
 Remove the metal grease filters.
 Remove the saturated activated
charcoal filter. Fit the new filters.
 Replace the metal grease filters.
LIGHTING
LIGHT REPLACEMENT (Completed by professionals)
Replacing the light modules
 Cannot replace the light bulbs, the entire light module has to be repla-
ced.
 When changing the light modules, the contacts are live.
Before changing the light module(s), unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.
10
V.1