Publicité
Les langues disponibles
Les langues disponibles
7. After the scale has been hung, you can feed the cable provided into the control box.
8. Plug the (male) connector into the box where the
(female) connector is mounted. This can only be
done in 1 way. For one weighing platform, you will
just use the left connector, for two platforms, you
will use both.
9. The next step is to connect the antenna. This is done as follows.
10. Hang the antenna outside for maximum range. The buckle can be mounted using the items
provided. Next, connect the cable to the control box.
11. As a final step, put the plug into the power outlet and then the scale will be operational. You
do not have to make any further adjustments to the settings.
9
Publicité
