Features; Product Specifications; Assembly - Homelite UT09526 Manuel D'utilisation

PRODUCT SPECIFICATIONS

Engine Displacement.......................................................................................................................................................26cc
Air Velocity:
MPH ............................................................................................................................................................................150
CFM ........................................................................................................................................................ 400 (at housing)
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ENGINE
The blower has a powerful 26cc engine with sufficient power
to handle tough blowing jobs.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Blower
Upper Blower Tube
Sweeper Nozzle
2-Cycle Engine Lubricant
Operator's Manual
NOTE: Read and remove all hang tags and store with the
Operator's Manual.

FEATURES

FEATURES
STOP SWITCH AND THROTTLE LEVER
This lever is used to stop the engine and allows the blower
to be operated at any speed between idle and full throttle.
UPPER BLOWER TUBE AND SWEEPER
NOZZLE
The blower tube and sweeper nozzle can be assembled and
installed on the blower without using any tools.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of the product
with damaged or missing parts could result in possible
serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this tool.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark plug
wire from the spark plug when assembling parts.
WARNING:
This product is intended for blower use only and is not
designed for vacuum use. Do not attempt to open the air
inlet cover that covers the impeller. Opening the air inlet
cover could result in contact with the impeller blades and
cause serious personal injuries.
Page 6 — English