Kenwood KAC-424 Manuel D'instructions page 7

INSTALLATION PROCEDURE
1. Before starting installation, disconnect the © terminal of the battery.
This will prevent short circuits.
2. Connect the Input and Output leads.
3, Connect the Ground lead (Black) to the metal body of the car.
4. Connect the Power jead (Yellow).
5. Install the unit in the car.
6. Connect the negative © terminal of the battery.
a CAUTION
e A short circuit may cause a blown fuse. A short circuit is a serious problem that
could also cause a fire. Check the wiring carefully and, if any wires are short-
circuited, rewire immediately. lf no short-circuits are found, replace the fuse with
one having the same rating (see indication on unit}.
@ Check that no unconnected wires or connectors are in contact with the body of the
car. Extraneous ncise cr current entering the system can cause malfunction or
damage.
ACCESSORIES
Power connection cord
Self-tapping screws
(> 4 x 12 mm)
Lat,