Publicité
UBBINK
POOL WARRANTIES
®
Swimming pool 300x490 - H120 cm
Warranty conditions:
• The pool must be assembled within 48 hours after opening the package. However, if you are forced to keep your pool unpacked for an indefinite period of time
before installation (e.g. after-sales service request), it is essential to keep all wooden parts flat in a dry and ventilated area, and to restrap them firmly to maintain
the benefit of the warranty.
• Assembly of the pool on a flat, smooth, level concrete slab in accordance with the dimensions indicated in the instructions is mandatory for the validation of the
warranty.
• Our warranty is limited to the replacement of defective parts. It does not in any way imply a claim for compensation or damage and interest.
• The general warranty does not apply in the following cases:
- Use of equipment not in accordance with our instructions.
- Damage caused by improper handling during and after assembly or any modifications made to structural components without the manufacturer's consent.
The pump:
UNDER WARRANTY
- Electrical problem: 2 years under normal use conditions (from the date of purchase of the consumer)
The liner:
UNDER WARRANTY
- 2-year warranty: Sealing and holding of welds under normal use conditions (from the date of purchase by
the consumer)
Example of warranty coverage
Filtration:
UNDER WARRANTY
- 2-year warranty on: tank, drain plug, collar, multi-way valve, pump-filter connection pipe (from the date
of purchase of the consumer)
NOT UNDER WARRANTY
- Deterioration by abrasion or corrosion (particularly in the context of water treatment by salt electrolysis)
- Damage due to faulty connection or improper replacement of the cable and/or power plug
- Equipment dismantled or reassembled by a third party
- Breakage of parts (pump base, prefilter cover, fluted tip...) – use of the dry pump
- Damage to the pump due to its immersion (flooding of the technical room for example) – damage due
to freezing
NOT UNDER WARRANTY
- Deformations of the liner that has been without water for more than 24 hours (never completely drain your
pool) – tasks related to algae growth
- Tasks related to the decomposition of foreign bodies in contact with the liner
- Stains and discolourations resulting from the action of oxidising products
- Colour stability and wear due to friction of the material on various surfaces
- Liner tears below the hung rail resulting from liner movement or poor water line maintenance
- Holes, snags, tears or cuts
- Tasks resulting from overdosing or improper handling of treatment products (poured directly into the water)
- Folds or damage resulting from improper installation of the liner
NOT UNDER WARRANTY
- Leakage problems due to operating pressure exceeding the maximum permissible pressure (see filter
instructions)
- If sand with grain size less than 0.6 mm is used
- Damage or inconvenience resulting from improper assembly or failure to comply with our assembly
instructions
- frost damage
18
Publicité
