Publicité
Les langues disponibles
Les langues disponibles
FP-121936.1
PARTS DESCRIPTION
1. Artificial firewood
2. Air outlet
3. Decoration handle
4. Screen
PLACEMENT
This appliance is designed to be placed on a hard, level surface. When positioning, please keep the following
points in mind:
1. If you are placing the appliance in an alcove, make sure that there is at least 150mm of space on all sides to
ensure good air circulation.
2. The appliance must not be located over a fixed electrical socket. The socket must always be accessible in
order to disconnect the appliance from the electrical supply for maintenance.
3. Keep hearth rugs and other soft furnishings away from the front of the appliance. They could obstruct the
free flow of hot air from the fan and damage both soft furnishings and appliance.
Warning: Never cover the appliance or obstruct the air outlet, this could cause overheating and consequently
risk of fire.
USE
1. Plug in the appliance.
2. Select your desired working functions:
- Switch (1): Switch on/off the power and flame effect
Note: This switch must be in the position "I" for unit to operate with or without heat.
- Switch (2): Switch on/off the fan and 1000W heat output
- Switch (3): Switch on/off additional 1000W heat output
Note: This switch cannot work separately. It must work together with switch (2).
3. Rotate the thermostat knob (4) clockwise or anticlockwise to increase or decrease your desired room
temperature setting. Make sure it is set above the current room temperature. Otherwise, the appliance will
not begin to heat.
Note: The flame effect can be operated with or without heat.
- 5 -
EN
Publicité
