Led Flashing Sequences And Transmission Behaviour; Information About Radio Operation - REV Ritter MAX! Fensterkontakt Mode D'emploi

The LED's flashing sequences have different meanings:
Flashing
sequence
1x flash
2x flashes
3x flashes

10. Information about radio operation

Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibility
of interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of the
receiver, environmental factors such as humidity in the vi-
cinity have an important role to play, as do on-site struc-
tural/screening conditions.
REV Ritter hereby declares that the model is in accord-
ance with the underlying requirements and other rel-
evant provisions of Directive 1999/EC. For the complete
CE Declaration of Conformity please refer to www.rev.biz
20
9. LED flashing sequences and
transmission behaviour
Meaning
Window open/closed, radio command sent
successfully
Duty cycle has been exceeded. The longest
period to wait before sending again would be
an hour.
Error message: Window open/closed, radio
command not sent