SW-Motech KFT.05.965.65000/B Instructions De Montage page 76

2
Installing the lid limiter
2.1 - Place the lid limiters (2) with the large openings on the mushroom-
shaped supports provided
 NOTE: Pay attention to the proper use of the DUSC (1):top case or side case.
Fasten the lid limiters (2) to the respective mushroom-shaped DUSC (1).
2.2 - Pull the lid limiters (2) into fixed position.
 NOTE: Before closing the lid for the first time, the lid limiters (2) must be
slightly compressed. When closing the lid, make sure that the lid limiters (2) are
not trapped between the lid and the case body.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
5
2
2
×
Errors and omissions excepted
Subject to technical and design changes.