SW-Motech KFT.05.965.65000/B Instructions De Montage page 130

6
Loading
 WARNING: Ensure that the load is evenly distributed! Ensure that the
load will not slip while driving!
 NOTE: Make sure never to store sharp-edged, pointed or similar objects that
could cause personal injury or damage to the vehicle/DUSC! Be particularly
careful not to damage the overpressure membrane built into the lid!
Care
Use ONLY a soft textile brush, cloth or sponge and warm soapy water for
cleaning! Then rinse with clean water.
Do NOT use any harsh cleaning agents, utensils or pressure washer! Be sure
to clean the DUSC after winter driving to avoid salt damage.
 NOTE: Surface materials may be subject to fluctuations in color (fading) in the
event of prolonged and intensive exposure to sunlight and the elements (e.g.
smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear!
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
9
Errors and omissions excepted
Subject to technical and design changes.