Technical Data - Husqvarna W520 Manuel D'utilisation

Engine
Brand
3
Displacement, cm / cu. in.
Speed, rpm
Nominal engine output, kW / hp
Ignition system
Spark plug
Electrode gap, mm / in
Fuel and lubrication system
Fuel, unleaded, minimum octane number, RON / AKI
Fuel tank capacity, l / gal
Oil tank capacity, l / q
2
Engine oil
Weight
With empty tanks, kg / lb
Cutting equipment
Cutting height, mm / in
Cutting width, mm / in
Blade
Article number
Grass catcher capacity, l / cu. ft
Drive
Speed, km/h / mph
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manufacturer's man-
ual and select the best viscosity based on the expected outside temperature.
1500 - 005 - 23.09.2020

Technical data

1
W520
Kawasaki FJ180V
179 / 10.9
3600
3.4 / 4.5
NGK BPR5ES
0.7–0.8 / 0.028-0.032
90 / 87
1.8 / 0.48
0.65 / 0.69
SAE 30/SAE 10W-30
54 / 119
37–114 / 1.45-4.5
510 / 20
Collect
5821494-10
65 / 2.3
3.5–6 / 2.2-3.7
17