- When the gate is obstructed: The gate stops.
- Optional: The gate operator can be connected to a solar system, indicator light, photocell, back-up battery,
keypad and other access control devices.
- Speed control: The opening and closing speed of the gate can be adjusted.
- Soft start: The operator features a soft start function.
- Automatic closing: The operator has an automatic closing function with an adjustable closing time.
- Pedestrian mode: The gate can be opened in single or double leaf mode.
- Several remote transmitters: The controller can easily have several additional remote transmitters to control
gate opening.
- Back-up battery: A 24V DC back-up battery can be incorporated.
- Optional devices: 24V DC gate lock, photocells, keypad, push-button, large or small control box.
The operator can be configured to allow a default open condition or a default close condition depending on the
location of the hardware brackets provided.
99 mm
59 mm
Dx2
General options and accessories
Construction Drill and Bolts
139 mm
13 mm
33 mm
A
Drill 4 Holes of 8mm Diameter.
Jx1
B
Insert the 4 Provided Bolts for
concrete or brick and Tighten
Properly (Do not over tighten as
189 mm
you may strip the bolt out of the
Ix4
concrete or the brick). Rref I x 4.
0x2
C
Place the Motor Connecting
Bracket and Tighten with the
17,5 mm
Provided Screws. Ref. O x 2.
EN
8