Casanoov RANGER B150 Mode D'emploi page 11

A Drill 2 holes 10.2 mm in diameter with a spacing of 68 to 77 mm between the 2 holes.
B Place the bracket (K) over the drilled holes.
C Place the motor on the bracket (K). Use the spanner (F) to tighten the 2 components correctly.
Please note that the bolts used to secure the front bracket to the door are not supplied as the
thickness of each door is different.
D Place the bracket (K) over the drilled holes.
Installation of Motor's Arms to Gates
Lubrication : 1 - 2 times a year
EN
11