Publicité
Les langues disponibles
Les langues disponibles
Connect a Push Button
Follow these steps to change the ring and halo light color for an existing
doorbell, too.
1. Press and hold the Setting button
on the doorbell for three seconds.
The halo light will circle.
2. Press the push button.
3. Within 12 seconds of pressing the
push button, press the Music button
to select the ring for that push
button.
4. Within 12 seconds of pressing the
doorbell, press the Sunlight button
to select a halo light color for that
push button.
Customize your Doorbell
You can customize your doorbell to play part of any song or sound you choose.
You can also create a Secret Knock with a different ring.
Your Tune
You can install any MP3 ile as a custom tune.
1. Connect the USB cable to the doorbell, then
plug it into a computer.
2. Using your computer, copy the tune you want
(MP3 format only) onto the doorbell. The
doorbell connects to your computer like a jump
drive.
3. Follow the Change the Tune process on page
2 to select your tune.
4. Press the push button, and your tune will play for up to 15 seconds.
The USB cable can power the doorbell if it is plugged into a USB charging
socket. This feature does not work when plugged into a computer.
33-00184EFS_A.indd 6
6
4/15/2016 3:15:05 PM
Publicité
