Uline H-9019 Instructions De Montage page 5

18. Position loose cords underneath the cable
management trays (9). Attach the cable
management trays to the adjustable table frame (3)
and adjustable return frame (4) using twelve M6 x 15
mm machine screws (12) and 4 mm hex wrench (16).
(See Figure 12)
Figure 12
PAGE 5 OF 23
ASSEMBLY CONTINUED
19. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
20. Plug power cord into outlet. Follow operation
instructions to initialize the desk prior to first use.
9
12
0723 IH-8367