RedMax BCZ350S Manuel D'utilisation page 14

Masquer les pouces Voir aussi pour BCZ350S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

referred to as outboard oil. Do not use oil
for four-stroke engines.
To mix gasoline and two-stroke oil
Gasoline, liter
5
10
15
20
US gallon
1
2 1/2
5
CAUTION: Small errors can influence the
ratio of the mixture drastically when you mix
small quantities of fuel. Measure the quantity
of oil carefully and make sure that you get
the correct mixture.
1. Fill half the quantity of gasoline in a clean container
for fuel.
2. Add the full quantity of oil.
3. Shake the fuel mixture.
4. Add the remaining quantity of gasoline to the
container.
5. Carefully shake the fuel mixture.
CAUTION: Do not mix fuel for more than 1
month at a time.
To fill the fuel tank
1. Clean the area around the fuel tank cap.
14
2. Shake the container and make sure that the fuel is
3. Remove the fuel tank cap.
4. Fill the fuel tank.
Two-stroke oil,
5. Tighten the fuel tank cap carefully.
liter
6. Move the product 3 m (10 ft) or more away from the
2% (50:1)
0.10
0.20
0.30
0.40
US fl. oz.
2 ½
6 ½
12 ⅞
To prepare the product for start
1. Push the air purge bulb again and again until the fuel
2. Move the choke control to the choke position.
fully mixed. Use a fuel container with an anti-spill
valve.
refueling area and fuel source before starting.
CAUTION: Contamination in the tanks
causes malfunction. Clean the fuel tank and
chain oil tank regularly and replace the fuel
filter one time a year or more.
starts to fill the bulb.
Note: It is not necessary to fully fill the bulb.
1289 - 002 -

Publicité

Table des Matières
loading

Table des Matières