IARP GLEE 45 PRIME Instructions Pour L'utilisateur page 18

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
1. DISPOSAL OF USED MATERIALS
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2012/19/UE
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately avoids possible negative consequences for
the environment and health deriving from inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is marked
with a crossed-out wheeled dustbin.
The symbol on the product or on the packaging indicates the product must not be
considered normal domestic waste, but must be brought to an appropriate collection
point for recycling of the electrical and electronic equipment.
By disposing of this product appropriately, you contribute to avoiding potential
negative consequences, which could derive from inadequate disposal of the product.
For more detailed information on recycling of this product, contact the municipality
office, the local waste disposal service or the shop where you purchased the product.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components
and glass.
WARNING!
Polyurethane insulation uses CICLOPENTHANE as expander, that doesn't affect the
environment but is inflammable.
To guarantee the same respect when it's disposed of , never abandon the equipment
outside.
Don't throw the packaging material from your equipment in the rubbish but sort
the various materials: eg.polystyrene, cardboard, plastic bags. The demolition
of the cabinet and the recovery of the component materials must be carried out
according to the local regulations in force in this matter.
2. GENERAL INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral
soap then dry it with a soft cloth; for the glass parts only use specific products, avoiding the
use of water which can leave on the glasses limestone residues.
• It is necessary that the capacitor unit is in the free air exchange condition, therefore the
ventilation zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power socket.
• Never place containers of liquid on or immediately above the ticket counter; should the
content spill out, it would damage the counter.
• The measured sound pressure emanated A is below 70dB (A).
GLEE 45 LITE
GLEE 45 PRIME
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1 8 / 7 2
PAGE
UM000326
N° DOC