Casselin CDS1 Mode D'emploi page 18

5. INSTALLATION AND USE
Installation diagram:
.
1) Unpack all supplies and remove all packing materials
2) As shown in Figure A, grab the soap dispenser and open it using the plastic key supplied with it.
3) Take out the soap container (Figure B)
4) Take an erasable pen, then using the plastic shell and the pen mark the holes to be made (Figure
C).
Then drill the holes in your wall using a drill.
5) Secure the soap dispenser using the screws and plugs supplied with the device
(Figure D)
6) Take the soap tank and fill it with liquid soap only (Figure F)
7) After closing the tank, fix it in the plastic shell (Figure F)
8) Using the plastic key, close the product, collect the key and store it carefully (Figure G)
6. CLEANING AND MAINTENANCE
Clean the soap dispenser regularly with a cloth and non-corrosive cleaning product.
The tank and the plastic shell should be cleaned.
EN