Alecto BC-18 Mode D'emploi page 16

USAGE
Power on:
1. Press button on / off. All segments in the LCD light.
2. As soon as
Weighing:
1. Power-on the scale as described previously.
2. Put the baby in the centre of the scale.
3. The BC-18 continu measures the weight of the baby. When however this weight is
constant for over 1 second, the read-out flashes 3 time and the weight is displayed for
a couple of seconds.
0-set:
If a towel is put on the scale and the display show its weight, press the 0-set button to
reset the display to
Power-off:
Press the on / off key momentairiy to power-off the scale.
To safe batteries, the scale will switch-off automatically after about 30 seconds of no use.
Memory:
The last measured weight is automatically stored in memory. As soon as the scale is
switched-on, the LCD first shows the last measured weight for a couple of seconds.
Measuring in Kg or Lb:
You can set the BC-18 to measure in Kilograms (kg) or in pounds (lb). The selected unit is
displayed on the upper side in the display.
1. Power-on the scale.
2. As soon as all segments light, again press the on / off button.
3. The read-out has now changed from Kg into Lb or from Lb into Kg.
GB
kg lights, the scale is ready for use.
kg.
16