Parts Description - Ayce MIC Manuel D'utilisation

PARTS DESCRIPTION

1
2
3
4
1. DISPLAY 5. Handle
2. Control panel 6. Air Inlet Grill
3. Front Grill 7. Main Switch
4. BASE
① ② ③ ④
1. ON / Stand - By button
2. MODE button
3. TIMER button
4. ECO mode button
5
6
7
⑤ ⑥ ⑦
5. SWING ON / OFF button
6. "-" button
7. "+" button
OPERATION
1.
Plug into the mains socket.
2. Turn on the main switch placed on the back of the appliance.
3. The appliance emits a beep (if "beep" sound is ON). The blinking Stand-By
indicator comes on and remains visible while the appliance is powered.
4. If the Stand-By indicator is not displayed, be sure that the appliance is on a
horizontal surface.
5. Press the ON/STAND-BY button to turn the appliance ON. It begins heating
the room according to the last used settings.
6.Press the MODE button to select one of the following operating modes:
6. Anti-frost (The appliance keeps the room at about 7°C avoid freezing)
FAN (in this mode the appliance doesn't emits heat; only the fan operates)
Heating 1
Heating 2
Heating 3
7. To distribute the air flow over a wider surface, press the swing button
appliance starts swinging to the right and left. To stop the appliance in the
desired position, simply press the swing touch button again.
8. To turn off the product press On-Stand-by
show a countdown for about 30 seconds. After 30 seconds the appliance will be
in stand-by mode.
9.
To completely turn off the product the main switch must be in "0" position (off).
Heating function
In this mode, the desired temperature can be selected by pressing the adjustment
buttons "+" and " –". The blinking target temperature is shown for some second:
• Heating 1 : The appliance operates at low power, reducing noise levels and energy
consumption to a minimum.
• Heating 2 : The appliance operates at medium power.
• Heating 3 : The appliance operates at high power to heat the room rapidly.
ECO function
This function is available in Heating 1, Heating 2 and Heating 3 modes only. To
activate this function press the ECO
displayed.
The ECO function will compare the target temperature, with the current ambient
temperature, and it will automatically select the most appropriate heating level to
guarantee an optimum comfort level while reducing the energy consumption.
While the ECO function is ON, the appliance may switch automatically to a lower or
higher heating level, even several time. The corresponding heating level is always
shown on the display.
48 | 49
.The
push button: the display will
push button. The ECO icon will be
GB