Publicité
Anleitung PSM 1010 SPK 1
A
07.03.2005
8:07 Uhr
Seite 7
On/Off switch:
To switch on: Press switch A
Continuous operation: Lock switch A with
locking button B
To switch off: Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
B
Rotary switch in "Drill" position. Change switch
position only when the drill is at a standstill!
Rotary switch in "Hammer drill" position.
Change switch position only when the drill
is at a standstill!
Please note: This switch should be in 'drill'
position when drilling holes in tiles.
GB
7
Publicité
