Publicité
Les langues disponibles
Les langues disponibles
GB
I
AVVERTENZE
OPERATION
CRISALIDE
DISPLAY
Titolo
Display
A
B
Led
A.Light ON/OFF key: press this key to switch on or off the hood lights.
B.Motor ON/OFF key: press this key to start/stop the motor and scroll cyclically among the extraction speeds.
(0-1-2-3-timed intensity-0)
Time adjustment: to set the time, simultaneously press keys A and B, the display starts to flash. Use key A to
adjust the hours, key B the minutes. Once the time is set, simultaneously press A and B to end the procedure.
Note: the LED on the hood indicates the various speeds: green 1st speed, orange 2nd speed, red 3rd speed and flashing red 4th speed.
All hoods with capacities exceeding 650 m3/h have the last timed speed; It lasts for 7 minutes, after which it
automatically returns to the last non-timed speed.
This product is equipped with a receiver that allows operating it from a distance via remote control
(available as optional) or from the hob (sold separately).
If you do not have the remote control, follow the procedure below to disable the receiver and prevent
any interferences:
1 Unplug the device for at least 10 seconds
2 Plug it back in
3 Press the light key on the hood control panel until the lights turn on
4 Press the start key. If all the lights are off, it means that the receiver has been disabled successfully.
To re-enable the receiver, follow the remote control or hob pairing procedure.
28
Publicité
