Publicité
Les langues disponibles
Les langues disponibles
program mode. Select the time with the 'Time Entry' button,
GB
the display will show "00:00", select the requested time with
the number keyboard. After that, select the power level. Press
the power level buttons [0%/20% (defrost) /50%/70%], the dis-
play will show the selected power. If you press again the same
power level button, the power will be back to set 100% power.
Also, if no power level button is set, the power will be default to
100%. After setting the time, power and press the 'Start' button
to save the program. The display will show "ProG". Close the
door to return to 'ready mode'. If you want to cancel during pro-
gramming, press the 'Pause' button and the oven will return to
the 'door open' mode and the program won't be saved.
Below a quick guide how to make a program of 1.25 minutes
at 70% power:
1) Open the door and press number button '1' for 5 seconds,
display will show "ProG".
2) Press number button '3', the program will be saved in "3".
3) Press the number buttons '1' '2' '5' to set the cooking time.
4) Press
for the power level. The display will show "PL7".
5) Press the 'Start' button. The program is now saved under
number keyboard '3'.
To overwrite the program repeat the steps above.
Note: Total programming time is limited to 60 minutes only.
Note: When the cooking time exceeds the maximum time the
microwave can operate (standard 60 minutes) three beeps will
be sound. This means you need to adjust the time before the
program can work.
Note: See also = = > Return to factory settings.
Double quantity (X2)
This microwave is equipped with a function to calculate the
amount of time needed when preparing a double quantity of
food. Press the 'X2' button followed by the program and the mi-
crowave will increase the time you preset and start the process.
This function can only be used in combination with a preset pro-
gram mode.
Multi stage cooking Mode
This function allows the user to cook the food under different
combination of power levels by "Manual Entry mode or Pro-
gramming mode. The maximum number of stages is 3. To use
this function first follow the steps under 'Time Entry'. After
setting the time and power of the first stage press 'Time Entry'
again, the display shows "S-2", now input the desired time and
power. If a third stage is needed, press "time entry" once more,
the display will show "S-3", and input the desired time and pow-
er. Now press the 'Start' button to start the microwave. Mul-
ti stage input is set in a same manner while in programming
mode. Bellow an example of how this could work:
1) Open the door, then press and hold number "1" on the num-
ber keyboard for 5 seconds, display will show "ProG".
2) Press number button '3', the program will be saved in "3".
3) Press the number buttons '1' '2' '5' to set the cooking time.
The display will show "1:25".
4) Press
for the power level of stage 1. The display will
show "PL7".
5) To set the second stage press 'time entry' button, the dis-
play will show "S-2".
6) Press the number buttons '3' 3' '0' to set the cooking time.
The display will show '3:30'.
8
7) Press
for the power of stage 2. The display will show
"PL5".
8) To set the third stage press 'time entry' button once more,
the display will show "S-3".
9) Press the number buttons '1' '0' '0' to set the cooking time.
The display will show '1:00'.
10) Press
for the power of stage 3. The display will show
"PL2".
11) Press the 'start' button. The multi stage program is now
saved under button '3'.
Note: Total cooking time is limited to 60 minutes only.
Note: When multi stage cooking is active the microwave shows
the total time remaining of all stages.
Note: See also = = > Return to factory settings
Return to factory settings
To return the microwave back to the factory settings press and
hold the 'Start' and '0' button together until the buzzer sounds,
the display will show "00". Then, press 'Start'. When the micro-
wave restored the factory settings the display will show '11'. If
returning to the factory settings failed the display will show '00',
press 'Start' button and the display will now show 'CLEAR' and
the buzzer will sound once.
User options
This microwave allows the user to change some options. To
change first start by opening the door and press '2' for 5 sec-
onds, the display will show 'OP:--'. Press the number button
related with what needs to be changed, for example '2'. Now
the display shows 'OP:22', keep pressing '2' until the desired
setting is displayed 'OP:20'/'OP:21'/'OP:22' (it cycles through
these options). To set the desired setting press 'start'. Now the
change is saved. During changing the options you can cancel
this by pressing 'pause'. The change won't be saved and the
microwave will return to 'door open mode'. Below is a list of the
options that can be changes, bold printed items are the preset
options.
Option
Setting
OP:10
1 EOC Tone
OP:11
OP:12
OP:20
OP:21
2 Beeper Volume
OP:22
OP:23
OP:30
3 Beeper On/Off
OP:31
OP:40
OP:41
4 Keyboard Window
OP:42
OP:43
Description
3 beeps
Continuous beep
5 quick beeps, repeating
Beeper Off
Low
Medium
High
Key beep Off
Key beep On
15 seconds
30 seconds
60 seconds
120 seconds
Publicité
