Publicité
Les langues disponibles
Les langues disponibles
recommendations.
▪
Do not attempt to replace a damaged power cord, contact your after-sales service.
▪
The power socket must be easily accessible but out of reach of children. In case of
doubt, contact your installation technician.
▪
When positioning the appliance, ensure that the power cord is not pinched or damaged.
Daily utilisation
▪ Do not store inflammable substances or fluids inside the appliance. This would create a
risk of explosion.
▪ Do not operate other electrical equipment inside the appliance (mixers, whirling rotor
for ice cream, etc.).
▪ When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
▪ This appliance is designed for beverage storage.
▪ Do not expose the appliance to direct sunlight.
▪ Keep the appliance away from candles, luminaires and open flames, in order to avoid
fire risk.
▪ The appliance is heavy. Be careful when moving it. Do not tilt it more than 45°.
▪ If your appliance is equipped with castors, remember that these are only designed to
facilitate minor movements. Do not move the appliance over long distances.
▪ Do not lean or climb on the appliance or its elements.
▪ In order to avoid falling objects and to prevent damage to the appliance, do not
overload the compartments of the appliance.
Caution! Cleaning and servicing
▪ Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪ When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪ Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
▪ To ensure proper electrical connection, follow the recommendations given in the
present manual.
▪ Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
▪ It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪ Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
16
Publicité
