Making Connections To Use The Word Clock Of This Unit As The Clock Master - Tascam 8p Dyna Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Making connections to use the word
clock of this unit as the clock master
This connection method also applies to other audio interfaces
with WORD IN connectors.
Connection example when using the word
clock of this unit as the clock master at a
44.1/48kHz sampling frequency
TASCAM SERIES 8p Dyna
TASCAM SERIES 208i
Cable connections
o Use one optical cable to connect either the A or B
OPTICAL OUT (S/MUX) connector of this unit to the A or B
OPTICAL IN (S/MUX) connector of a TASCAM SERIES 208i.
o Use a BNC cable to connect the WORD OUT connector of
this unit to the WORD IN connector of a TASCAM SERIES
208i.
Setting the switch
o Set the TASCAM SERIES 208i 75Ω ON/OFF switch to ON.
o Set the 75Ω ON/OFF/THRU/WORD OUT switch on this unit
to WORD OUT.
Setting the sample clock source
o Use the sample clock switch to set the clock source of this
unit. (see "Switching the sample clock" on page 12)
o To set the clock source of the TASCAM SERIES 208i, set the
Settings Panel INFORMATION screen Sample Clock Source
item to "WORD".
14
TASCAM SERIES 8p Dyna
Connection example when using the word
clock of this unit as the clock master at
88.2/96kHz (S/MUX2) or 176.4/192kHz (S/
MUX4) sampling frequencies
TASCAM SERIES 8p Dyna
TASCAM SERIES 208i
Cable connections
o Use 2 optical cables to connect the OPTICAL OUT (S/
MUX) connectors of this unit to the OPTICAL IN (S/MUX)
connectors of a TASCAM SERIES 208i.
o Use a BNC cable to connect the WORD OUT connector of
this unit to the WORD IN connector of a TASCAM SERIES
208i.
Setting the switch
o Set the TASCAM SERIES 208i 75Ω ON/OFF switch to ON.
o Set the 75Ω ON/OFF/THRU/WORD OUT switch on this unit
to WORD OUT.
Setting the sample clock source
o Use the sample clock switch to set the clock source of this
unit. (see "Switching the sample clock" on page 12)
o To set the clock source of the TASCAM SERIES 208i, set the
Settings Panel INFORMATION screen Sample Clock Source
item to "WORD".

Publicité

Table des Matières
loading

Produits Connexes pour Tascam 8p Dyna Série

Table des Matières