Panasonic CS-E15JD3EA Mode D'emploi page 8

WEEKLY TIMER SETTING WEEKLY TIMER SETTING
Weekly Timer Display
TIMER/CLOCK
OFF/ON
CLOCK
Lights up if Timer
operation is selected
OFF Timer. To automatically
switch "OFF" the unit.
ON Timer. To automatically switch "ON" the unit.
Day to be selected
Day and Timer Set Up Method
MODE
1. Press Timer
to weekly timer.
UP
2. Press Timer
SELECT
3. Press to confi rm your selection.
4. "1" will be blinking, press
OFF/ON
5. Press Timer
UP
6. Press Timer
If you want to set the timer together with your
desired temperature, press
temperature.
SET
7. Press to confi rm program 1. The selected day
will be highlighted with
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30
seconds, or if the
that moment is confi rmed and timer setup is ended.
8
TIMER/CLOCK
MODE UP
OFF / ON
MODE UP SELECT OFF/ON DOWN
FAN SPEED MODE
QUIET/
TEMP
DOWN SET
AIR SWING POWERFUL
CLOCK
CANCEL
AC RC
CHECK RESET
6 different programs can
be set in a day (1 ~ 6)
Indicates the selected day
Indicates the next timer
operation day
Time to be selected
(10 minutes step)
for 4 seconds to change display
DOWN
or to select your desired day.
SELECT
to set program 1.
to select ON or OFF timer.
DOWN
or to select your desired time.
to select the
TEMP
.
SET
button is pressed, the setting at
OPERATION DETAILS OPERATION DETAILS
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to 6
programs in any given day.
• Same timer program cannot be set in the same day.
SELECT
FA
Check Current Timer Program
SET
AI
Perform the step below to check the timer program for a
particular day.
CANCEL
1. Press Timer
2. Press
3. Press Timer
press
4. Press Timer
Modify Current Timer Program or Add New
Timer Program
1. Press Timer
2. Press
3. Press Timer
4. Perform steps 4 to 7 of "Day and Timer Set Up
Method" to modify existing timer program, or add any
timer program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for a
particular day.
1. Press
2. Press Timer
3. Press
4. Press Timer
Press
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
CANCEL
.
• To enable previous weekly timer setting, press
then press
MODE
to enter timer mode.
SELECT
to enter day setting.
UP DOWN
or until your desired day is shown,
SELECT
to confi rm your selection.
UP DOWN
or to check the set programs.
MODE
to enter timer mode.
SELECT
to enter day setting.
UP DOWN
or until your desired day is shown.
SELECT
to enter day.
UP
DOWN
or until your desired day is shown.
SELECT
to enter program setting.
UP
DOWN
or until your desired day is shown.
CANCEL
to cancel the program,
SET
.
will disappear.
MODE
, then press
MODE
,